Measuring points and solutions-Air Pollution Analyzer, Air Quality Analyzer/Monitoring System Supplier

>Application
Pulverized coal injection Blast furnace gas Sintering and pelletizing Steelmaking(wet dedusting)Steelmaking(dry dedusting)Coking Electrolytic Aluminum Nonferrous aluminum Cement Waste refuse incineration Coal-fired power plants FCC Refining Carbide acetylene Chlor-Alkali

Measuring points and solutions

In the production process of NSP cements, consumption of powered coal is mainly consumed in two equipment: rotary kiln for clinker calcining and decomposing furnace for calcium carbonate. In order to know the fuel utilization in the rotary kiln and decomposing furnace. The main method to monitor fuel combustion is to monitor gas components.

NO.	Measurement point	Temperature	Pressure	Measurement components	Detection purpose	Recommend products*
1	Grinding coal section: pulverized coal bin	Normal	Slight negative pressure	O2: 0-21% CO: 0-3000ppm	Prevent accidents or explosion in pulverized coal preparation	LGT-100 or LGT-106
2	Preheater outlet blowdown stack	Normal	Slight negative pressure	CEMS (7 parameters； NH3: 0-10ppm	Online-monitor gas components in emission gas and Real - time monitoring denitration efficiency	EM-5, LGT-100 GA-5000
3	Cooler flue gas emission stackNormal	Normal	Slight negative pressure	CEMS(4 parameters)	Online monitor dust density, temperature, pressure, flow	EM-5
4	5-stage preheater exhaust gas downstream	200°C	Slight negative pressure	CO、NOx、O2	Monitor fuel combustion condition adjust production device, realize production optimization	EM-5 or LGT-180

You May Also Like